Erich Jaeger alternative

341240

(front-) «ERICH JAEGER» Junction box

Use this article number as the starting point for a quote: ConnectorRoute checks suitable alternatives, fit, availability, MOQ and lead time before proposing a replacement route.

ConnectorRoute is independent and is not affiliated with Erich Jaeger GmbH. Brand and article references are used for identification and cross-reference purposes only.

Product context

Product description and application

Erich Jaeger 341240 is (front-) «ERICH JAEGER» Junction box. This component belongs to a vehicle electrical system. The article number is only the starting point; the practical replacement depends on the connected system, mounting situation and electrical function. ISO 12098 points to the 15-pole 24V truck-trailer connection family; it is normally checked together with the matching 15-pole plug, socket or coil cable. The known selection frame is agriculture.

What does 341240 do?

This page treats 341240 as a real vehicle-electrical component, not just as a search term. In practice the part is selected by connector family, electrical standard, voltage, pole count and the way it is mounted or connected in the vehicle. For a lighting installation components, junction box, the mating component and cable route are part of the decision.

Technical checks before replacing it

Check the product drawing, connector layout, mounting position, electrical load and mating component before treating another part as equivalent.

How ConnectorRoute approaches the alternative

ConnectorRoute starts with the Erich Jaeger number, then checks the application: vehicle type, yearly volume, existing mating connector, drawings or photos, required approval level and supply continuity. Only after that does an alternative become a quoteable route instead of a guess.

Products that belong in the same request

For a useful quote, include related system parts where possible: 153109 9P/12V «Pass-Through» Socket (ISO 11783-2), 153110 9P/12V «ISOBUS (IBBC) 120» Socket (ISO 11783-2) - Breakaway Connector, 382164 3P/6-24V plug housing (DIN 9680), 251315 9P/12V «ISOBUS (IBIC)» Plug (ISO 11783-2) - Implement Connector, 651022 4P/6-24V Coil (DIN 72575). That helps prevent solving one article number while leaving the matching plug, socket, coil cable, adapter or supply cable as the next bottleneck.

Structured product facts

Article number
341240
Product family
Lighting Installation Components, Junction Box
Category
Lighting Installation Components, Junction Box
Industry
agriculture
Related product families
component
Protection
IP 54
Branding
ERICH JAEGER
Product supplement
(front-)
Size, no., pole and standard of terminals
Input: socket 15-pin ISO 12098 socket 7-pin N ISO 1185 socket 7-pin S ISO 3731 Output: 2x grommet (1x closed)
Brand
ERICH JAEGER

341240

Questions about this reference

Can Erich Jaeger 341240 be replaced one-to-one?

Sometimes, but it should not be assumed from the article number alone. The connector standard, pole count, voltage, contact type, seal, cable entry and application need to match before ConnectorRoute confirms a replacement.

What should I send with an enquiry?

Send the Erich Jaeger article number, quantities, yearly demand, photos of the installed part, drawings if available, the mating connector and any vehicle or trailer information.

Why does the page mention related products?

Truck and trailer electrics are system-based. A socket, plug, coil cable, adapter and supply cable often need to be checked together to avoid a partial replacement route.

Technical specifications

Technical data

Protection
IP 54
Branding
ERICH JAEGER
Product supplement
(front-)
Size, no., pole and standard of terminals
Input: socket 15-pin ISO 12098 socket 7-pin N ISO 1185 socket 7-pin S ISO 3731 Output: 2x grommet (1x closed)
Brand
ERICH JAEGER