C ConnectorRoute

Erich Jaeger alternative

251336

9P/12V «ISOBUS (IBIC)» Plug (ISO 11783-2) - Implement Connector

Use this article number as the starting point for a quote: ConnectorRoute checks suitable alternatives, fit, availability, MOQ and lead time before proposing a replacement route.

Request quote Official Erich Jaeger product page

ConnectorRoute is independent and is not affiliated with Erich Jaeger GmbH. Brand and article references are used for identification and cross-reference purposes only.

System products

Products often checked together with this reference: matching plugs, sockets, coil cables, adapters and supply cables. Generic installation material is intentionally excluded.

Product context

Product description and application

Erich Jaeger 251336 is 9P/12V «ISOBUS (IBIC)» Plug (ISO 11783-2) - Implement Connector. This plug is the cable-side half of the connection. It needs to match the socket mechanically and electrically, including contact type, cable diameter, sealing and the exact connector standard. ISO 11783-2 and 12V should be verified against the vehicle or trailer wiring diagram. The known selection frame is ISO 11783-2, 12V, 9P and agriculture.

What does 251336 do?

This page treats 251336 as a real vehicle-electrical component, not just as a search term. In practice the part is selected by connector family, electrical standard, voltage, pole count and the way it is mounted or connected in the vehicle. For a plug.png, the mating component and cable route are part of the decision.

Technical checks before replacing it

Check the product drawing, connector layout, mounting position, electrical load and mating component before treating another part as equivalent.

How ConnectorRoute approaches the alternative

ConnectorRoute starts with the Erich Jaeger number, then checks the application: vehicle type, yearly volume, existing mating connector, drawings or photos, required approval level and supply continuity. Only after that does an alternative become a quoteable route instead of a guess.

Products that belong in the same request

For a useful quote, include related system parts where possible: 151234 9P/12V «ISOBUS (IBBC) 150 Active» Socket (ISO 11783-2) - Breakaway Connector - Active, 652220 9P/12V «ISOBUS (IBIC)» Cable (ISO 11783-2) - Implement Connector, 151236 9P/12V «ISOBUS (IBBC) 150 Passive» Socket (ISO 11783-2) - Breakaway Connector - Passive, 652224 9P/12V «ISOBUS (IBIC)» Cable (ISO 11783-2) - Implement Connector, 151232 9P/12V «ISOBUS (IBBC) 150 Passive CM» Socket (ISO 11783-2) - Breakaway Connector - Passive. That helps prevent solving one article number while leaving the matching plug, socket, coil cable, adapter or supply cable as the next bottleneck.

Structured product facts

Article number
251336
Product family
plug.png
Category
plug.png
Standard
ISO 11783-2
Voltage
12V
Poles
9P
Industry
agriculture
Related product families
component
For cable diameter
11,00mm - 15,00mm
Protection
IP X9K, IP X4K, IP 6X, IP 54
Packaging
PE bag
Branding
ERICH JAEGER
Design/Version
Active (Master)

251336

Questions about this reference

Can Erich Jaeger 251336 be replaced one-to-one?

Sometimes, but it should not be assumed from the article number alone. The connector standard, pole count, voltage, contact type, seal, cable entry and application need to match before ConnectorRoute confirms a replacement.

What should I send with an enquiry?

Send the Erich Jaeger article number, quantities, yearly demand, photos of the installed part, drawings if available, the mating connector and any vehicle or trailer information.

Why does the page mention related products?

Truck and trailer electrics are system-based. A socket, plug, coil cable, adapter and supply cable often need to be checked together to avoid a partial replacement route.

Technical specifications

Technical data

For cable diameter
11,00mm - 15,00mm
Protection
IP X9K, IP X4K, IP 6X, IP 54
Packaging
PE bag
Branding
ERICH JAEGER
Design/Version
Active (Master)