C ConnectorRoute

Erich Jaeger alternative

251106

3P/6-24V plug with socket contacts (DIN 9680 - similar). - with socket contacts instead of pin contacts

Use this article number as the starting point for a quote: ConnectorRoute checks suitable alternatives, fit, availability, MOQ and lead time before proposing a replacement route.

Request quote Official Erich Jaeger product page

ConnectorRoute is independent and is not affiliated with Erich Jaeger GmbH. Brand and article references are used for identification and cross-reference purposes only.

External article references

Known cross-reference numbers

These supplier, distributor and vehicle-brand references were present in the supplied highrunner overview. Use them for identification; ConnectorRoute still validates the technical replacement route before quoting.

Brand / supplier Reference numbers
Bosch F032182377ZDB
Europart 4830251106
Herth & Buss 51305685

System products

Products often checked together with this reference: matching plugs, sockets, coil cables, adapters and supply cables. Generic installation material is intentionally excluded.

Product context

Product description and application

Erich Jaeger 251106 is 3P/6-24V plug with socket contacts (DIN 9680 - similar). - with socket contacts instead of pin contacts. This plug is the cable-side half of the connection. It needs to match the socket mechanically and electrically, including contact type, cable diameter, sealing and the exact connector standard. DIN 9680 - similar and 6-24V should be verified against the vehicle or trailer wiring diagram. The known selection frame is DIN 9680 - similar, 6-24V, 3P and agriculture.

What does 251106 do?

This page treats 251106 as a real vehicle-electrical component, not just as a search term. In practice the part is selected by connector family, electrical standard, voltage, pole count and the way it is mounted or connected in the vehicle. For a plug.png, the mating component and cable route are part of the decision.

Technical checks before replacing it

Check the product drawing, connector layout, mounting position, electrical load and mating component before treating another part as equivalent.

How ConnectorRoute approaches the alternative

ConnectorRoute starts with the Erich Jaeger number, then checks the application: vehicle type, yearly volume, existing mating connector, drawings or photos, required approval level and supply continuity. Only after that does an alternative become a quoteable route instead of a guess.

Products that belong in the same request

For a useful quote, include related system parts where possible: 151130 3P/6-24V(25A) Socket (DIN 9680), 251249 3P/6-24V(10A) Cable (DIN 9680), 651535 3P/24V(25A) Coil (without standard), 151131 3P/6-24V(25A) Socket (DIN 9680), 151167 3P/6-24V(25A) Socket (DIN 9680). That helps prevent solving one article number while leaving the matching plug, socket, coil cable, adapter or supply cable as the next bottleneck.

Structured product facts

Article number
251106
Product family
plug.png
Category
plug.png
Standard
DIN 9680 - similar
Voltage
6-24V
Poles
3P
Industry
agriculture
Related product families
component
External cross-references
Bosch: F032182377ZDB · Europart: 4830251106 · Herth & Buss: 51305685
For cable diameter
6,00mm - 10,00mm
Contact termination
plug-in contact
Protection
IP X4, IP 54
Type of seal
screw cap
Contact insert color
black

251106

Questions about this reference

Can Erich Jaeger 251106 be replaced one-to-one?

Sometimes, but it should not be assumed from the article number alone. The connector standard, pole count, voltage, contact type, seal, cable entry and application need to match before ConnectorRoute confirms a replacement.

What should I send with an enquiry?

Send the Erich Jaeger article number, quantities, yearly demand, photos of the installed part, drawings if available, the mating connector and any vehicle or trailer information.

Why does the page mention related products?

Truck and trailer electrics are system-based. A socket, plug, coil cable, adapter and supply cable often need to be checked together to avoid a partial replacement route.

Technical specifications

Technical data

For cable diameter
6,00mm - 10,00mm
Contact termination
plug-in contact
Protection
IP X4, IP 54
Type of seal
screw cap
Contact insert color
black