C ConnectorRoute

Erich Jaeger alternative

057039-4

8, 16P Contact (DIN 72580)

Use this article number as the starting point for a quote: ConnectorRoute checks suitable alternatives, fit, availability, MOQ and lead time before proposing a replacement route.

Request quote Official Erich Jaeger product page

ConnectorRoute is independent and is not affiliated with Erich Jaeger GmbH. Brand and article references are used for identification and cross-reference purposes only.

System products

Products often checked together with this reference: matching plugs, sockets, coil cables, adapters and supply cables. Generic installation material is intentionally excluded.

Product context

Product description and application

Erich Jaeger 057039-4 is 8, 16P Contact (DIN 72580). This component belongs to a vehicle electrical system. The article number is only the starting point; the practical replacement depends on the connected system, mounting situation and electrical function. DIN 72580 and the voltage should be verified against the vehicle or trailer wiring diagram. The known selection frame is DIN 72580, 8P and agriculture.

What does 057039-4 do?

This page treats 057039-4 as a real vehicle-electrical component, not just as a search term. In practice the part is selected by connector family, electrical standard, voltage, pole count and the way it is mounted or connected in the vehicle. For a lighting installation components, accessories, contact, the mating component and cable route are part of the decision.

Technical checks before replacing it

Check the product drawing, connector layout, mounting position, electrical load and mating component before treating another part as equivalent.

How ConnectorRoute approaches the alternative

ConnectorRoute starts with the Erich Jaeger number, then checks the application: vehicle type, yearly volume, existing mating connector, drawings or photos, required approval level and supply continuity. Only after that does an alternative become a quoteable route instead of a guess.

Products that belong in the same request

For a useful quote, include related system parts where possible: 151232 9P/12V «ISOBUS (IBBC) 150 Passive CM» Socket (ISO 11783-2) - Breakaway Connector - Passive, 551024 2P/6-24V(16A) (hand lamp-) Socket (ISO 4165) - with cable, 651405 8P/12V Cable - for "Aspöck - Europoint" tail lamp right, 251297 9P/12V «ISOBUS (IBIC)» Plug (ISO 11783-2) - Implement Connector, 251247 3P/6-24V(25A) Plug (DIN 9680). That helps prevent solving one article number while leaving the matching plug, socket, coil cable, adapter or supply cable as the next bottleneck.

Structured product facts

Article number
057039-4
Product family
Lighting Installation Components, Accessories, Contact
Category
Lighting Installation Components, Accessories, Contact
Standard
DIN 72580
Poles
8P
Industry
agriculture
Related product families
component
For cable diameter
1,60mm
Contact termination
crimp contact
Packaging
roll
Contact: for max. wire cross section [in mm²]
2.5
Contact: for min. wire cross section [in mm²]
1.5

057039-4

Questions about this reference

Can Erich Jaeger 057039-4 be replaced one-to-one?

Sometimes, but it should not be assumed from the article number alone. The connector standard, pole count, voltage, contact type, seal, cable entry and application need to match before ConnectorRoute confirms a replacement.

What should I send with an enquiry?

Send the Erich Jaeger article number, quantities, yearly demand, photos of the installed part, drawings if available, the mating connector and any vehicle or trailer information.

Why does the page mention related products?

Truck and trailer electrics are system-based. A socket, plug, coil cable, adapter and supply cable often need to be checked together to avoid a partial replacement route.

Technical specifications

Technical data

For cable diameter
1,60mm
Contact termination
crimp contact
Packaging
roll
Contact: for max. wire cross section [in mm²]
2.5
Contact: for min. wire cross section [in mm²]
1.5