Erich Jaeger alternative

651941

2P/24V Cable (VG 96917) - with 2P/24V plug without screw ring (according to VG 96917) and 2 rubber coated battery terminal grips

Use this article number as the starting point for a quote: ConnectorRoute checks suitable alternatives, fit, availability, MOQ and lead time before proposing a replacement route.

ConnectorRoute is independent and is not affiliated with Erich Jaeger GmbH. Brand and article references are used for identification and cross-reference purposes only.

External article references

Known cross-reference numbers

These supplier, distributor and vehicle-brand references were present in the supplied highrunner overview. Use them for identification; ConnectorRoute still validates the technical replacement route before quoting.

Brand / supplier Reference numbers
Europart 4830651941
Fricke 50700020
Herth & Buss 52289018
Hofmei 600945335
Würth 9990172681999

Product context

Product description and application

Erich Jaeger 651941 is 2P/24V Cable (VG 96917) - with 2P/24V plug without screw ring (according to VG 96917) and 2 rubber coated battery terminal grips. This cable is a pre-assembled connection route rather than a loose wire. Connector ends, cable length, conductor cross-section and system standard all need to be checked before replacing it. VG 96917 and 24V should be verified against the vehicle or trailer wiring diagram. The known selection frame is VG 96917, 24V, 2P and defensievoertuigen.

What does 651941 do?

This page treats 651941 as a real vehicle-electrical component, not just as a search term. In practice the part is selected by connector family, electrical standard, voltage, pole count and the way it is mounted or connected in the vehicle. For a cable, the mating component and cable route are part of the decision.

Technical checks before replacing it

Check the product drawing, connector layout, mounting position, electrical load and mating component before treating another part as equivalent.

How ConnectorRoute approaches the alternative

ConnectorRoute starts with the Erich Jaeger number, then checks the application: vehicle type, yearly volume, existing mating connector, drawings or photos, required approval level and supply continuity. Only after that does an alternative become a quoteable route instead of a guess.

Products that belong in the same request

For a useful quote, include related system parts where possible: 151211 2P/24V(168A) Socket (VG 96917 A002), 251097 2P/24V(135A) Plug (VG 96917 E001A), 311181 2P/24V(300A) Adapter (STANAG 4074 / MIL-PRF-62122, VG 96917), 151212 2P/24V Socket (VG 96917 A001), 251098 2P/24V(168A) Plug (VG 96917). That helps prevent solving one article number while leaving the matching plug, socket, coil cable, adapter or supply cable as the next bottleneck.

Structured product facts

Article number
651941
Product family
cable
Category
cable
Standard
VG 96917
Voltage
24V
Poles
2P
Industry
defensievoertuigen
Related product families
component
External cross-references
Europart: 4830651941 · Fricke: 50700020 · Herth & Buss: 52289018 · Hofmei: 600945335 · Würth: 9990172681999
Cable length [in m]
3.5
Wire cross-sectional area
2x 35mm²
Contact insert color
black
Housing color
bronsgroen (RAL 6031-F9)
Housing material
breukvast metaal

651941

Questions about this reference

Can Erich Jaeger 651941 be replaced one-to-one?

Sometimes, but it should not be assumed from the article number alone. The connector standard, pole count, voltage, contact type, seal, cable entry and application need to match before ConnectorRoute confirms a replacement.

What should I send with an enquiry?

Send the Erich Jaeger article number, quantities, yearly demand, photos of the installed part, drawings if available, the mating connector and any vehicle or trailer information.

Why does the page mention related products?

Truck and trailer electrics are system-based. A socket, plug, coil cable, adapter and supply cable often need to be checked together to avoid a partial replacement route.

Technical specifications

Technical data

Cable length [in m]
3.5
Wire cross-sectional area
2x 35mm²
Contact insert color
black
Housing color
bronsgroen (RAL 6031-F9)
Housing material
breukvast metaal