C ConnectorRoute

Erich Jaeger alternative

641060

13P/24V Coil (ISO 12098 - 13P version ADR)

Use this article number as the starting point for a quote: ConnectorRoute checks suitable alternatives, fit, availability, MOQ and lead time before proposing a replacement route.

Request quote Official Erich Jaeger product page

ConnectorRoute is independent and is not affiliated with Erich Jaeger GmbH. Brand and article references are used for identification and cross-reference purposes only.

System products

Products often checked together with this reference: matching plugs, sockets, coil cables, adapters and supply cables. Generic installation material is intentionally excluded.

Product context

Product description and application

Erich Jaeger 641060 is 13P/24V Coil (ISO 12098 - 13P version ADR). This coil cable forms the flexible link between towing vehicle and trailer. Working length, maximum extension length, cable material and conductor cross-section matter just as much as the connector standard. ISO 12098 points to the 15-pole 24V truck-trailer connection family; it is normally checked together with the matching 15-pole plug, socket or coil cable. The known selection frame is ISO 12098 - 13P version, 24V, 13P and commercial vehicles.

What does 641060 do?

This page treats 641060 as a real vehicle-electrical component, not just as a search term. In practice the part is selected by connector family, electrical standard, voltage, pole count and the way it is mounted or connected in the vehicle. For a coil cable, the mating component and cable route are part of the decision.

Technical checks before replacing it

Check the product drawing, connector layout, mounting position, electrical load and mating component before treating another part as equivalent.

How ConnectorRoute approaches the alternative

ConnectorRoute starts with the Erich Jaeger number, then checks the application: vehicle type, yearly volume, existing mating connector, drawings or photos, required approval level and supply continuity. Only after that does an alternative become a quoteable route instead of a guess.

Products that belong in the same request

For a useful quote, include related system parts where possible: 141014 13P/24V Socket (ISO 12098 - 13P version ADR), 241018 13P/24V Plug (ISO 12098 - 13P version ADR), 711073 Adapter cable - with 15P/24V plug (ISO 12098) and 13P/24V plug (similar to ISO 12098), 141016 13P/24V Socket (ISO 12098 - 13P version ADR), 241016 13P/24V Plug (ISO 12098 - 13P version ADR). That helps prevent solving one article number while leaving the matching plug, socket, coil cable, adapter or supply cable as the next bottleneck.

Structured product facts

Article number
641060
Product family
coil cable
Category
coil cable
Standard
ISO 12098 - 13P version
Voltage
24V
Poles
13P
Industry
commercial vehicles
Related product families
component
Working length [in m]
4.5
Max. working length [in m]
5
Max. extension length [in m]
5.5
Wire cross-sectional area
12x 1.5mm² + 3x 2.5mm²
Type of seal
bending protection grommet

641060

Questions about this reference

Can Erich Jaeger 641060 be replaced one-to-one?

Sometimes, but it should not be assumed from the article number alone. The connector standard, pole count, voltage, contact type, seal, cable entry and application need to match before ConnectorRoute confirms a replacement.

What should I send with an enquiry?

Send the Erich Jaeger article number, quantities, yearly demand, photos of the installed part, drawings if available, the mating connector and any vehicle or trailer information.

Why does the page mention related products?

Truck and trailer electrics are system-based. A socket, plug, coil cable, adapter and supply cable often need to be checked together to avoid a partial replacement route.

Technical specifications

Technical data

Working length [in m]
4.5
Max. working length [in m]
5
Max. extension length [in m]
5.5
Wire cross-sectional area
12x 1.5mm² + 3x 2.5mm²
Type of seal
bending protection grommet