C ConnectorRoute

Erich Jaeger alternative

382696

contact sleeve

Use this article number as the starting point for a quote: ConnectorRoute checks suitable alternatives, fit, availability, MOQ and lead time before proposing a replacement route.

Request quote Official Erich Jaeger product page

ConnectorRoute is independent and is not affiliated with Erich Jaeger GmbH. Brand and article references are used for identification and cross-reference purposes only.

System products

Products often checked together with this reference: matching plugs, sockets, coil cables, adapters and supply cables. Generic installation material is intentionally excluded.

Product context

Product description and application

Erich Jaeger 382696 is contact sleeve. This component belongs to a vehicle electrical system. The article number is only the starting point; the practical replacement depends on the connected system, mounting situation and electrical function. ISO 25981 and 24V should be verified against the vehicle or trailer wiring diagram. The known selection frame is ISO 25981, 24V, 7P and commercial vehicles.

What does 382696 do?

This page treats 382696 as a real vehicle-electrical component, not just as a search term. In practice the part is selected by connector family, electrical standard, voltage, pole count and the way it is mounted or connected in the vehicle. For a accessories, plug, the mating component and cable route are part of the decision.

Technical checks before replacing it

Check the product drawing, connector layout, mounting position, electrical load and mating component before treating another part as equivalent.

How ConnectorRoute approaches the alternative

ConnectorRoute starts with the Erich Jaeger number, then checks the application: vehicle type, yearly volume, existing mating connector, drawings or photos, required approval level and supply continuity. Only after that does an alternative become a quoteable route instead of a guess.

Products that belong in the same request

For a useful quote, include related system parts where possible: 141145 Parking socket, 141148 7P/24V Socket (ISO 25981), 241114 7P/24V Plug (ISO 25981), 641244 7P/24V Coil (ISO 25981), 211045 7P/24V Plug (ISO 3731 - Type S). That helps prevent solving one article number while leaving the matching plug, socket, coil cable, adapter or supply cable as the next bottleneck.

Structured product facts

Article number
382696
Product family
Accessories, Plug
Category
Accessories, Plug
Standard
ISO 25981
Voltage
24V
Poles
7P
Industry
commercial vehicles
Related product families
component
Contact termination
crimp contact
Contact: for max. wire cross section [in mm²]
1
Contact version
contacthuls
Contact surface
nickel (Ni)
TECHnote
https://www.erich-jaeger.com/fileadmin/content/03_Service/Downloads/02_Commercial%20Vehicles/02_TECHnotes%20%26%20APPnotes/TECHnote%20-%20ISO%2025981%20de%2Ben.pdf

382696

Questions about this reference

Can Erich Jaeger 382696 be replaced one-to-one?

Sometimes, but it should not be assumed from the article number alone. The connector standard, pole count, voltage, contact type, seal, cable entry and application need to match before ConnectorRoute confirms a replacement.

What should I send with an enquiry?

Send the Erich Jaeger article number, quantities, yearly demand, photos of the installed part, drawings if available, the mating connector and any vehicle or trailer information.

Why does the page mention related products?

Truck and trailer electrics are system-based. A socket, plug, coil cable, adapter and supply cable often need to be checked together to avoid a partial replacement route.

Technical specifications

Technical data

Contact termination
crimp contact
Contact: for max. wire cross section [in mm²]
1
Contact version
contacthuls
Contact surface
nickel (Ni)
TECHnote
https://www.erich-jaeger.com/fileadmin/content/03_Service/Downloads/02_Commercial%20Vehicles/02_TECHnotes%20%26%20APPnotes/TECHnote%20-%20ISO%2025981%20de%2Ben.pdf