C ConnectorRoute

Erich Jaeger alternative

37829

7P socket boot/grommet

Use this article number as the starting point for a quote: ConnectorRoute checks suitable alternatives, fit, availability, MOQ and lead time before proposing a replacement route.

Request quote Official Erich Jaeger product page

ConnectorRoute is independent and is not affiliated with Erich Jaeger GmbH. Brand and article references are used for identification and cross-reference purposes only.

System products

Products often checked together with this reference: matching plugs, sockets, coil cables, adapters and supply cables. Generic installation material is intentionally excluded.

Product context

Product description and application

Erich Jaeger 37829 is 7P socket boot/grommet. This component belongs to a vehicle electrical system. The article number is only the starting point; the practical replacement depends on the connected system, mounting situation and electrical function. SAE J560, SAE J3082 and 12V should be verified against the vehicle or trailer wiring diagram. The known selection frame is SAE J560, SAE J3082, 12V, 2P and commercial vehicles.

What does 37829 do?

This page treats 37829 as a real vehicle-electrical component, not just as a search term. In practice the part is selected by connector family, electrical standard, voltage, pole count and the way it is mounted or connected in the vehicle. For a seal, accessories, socket, the mating component and cable route are part of the decision.

Technical checks before replacing it

Check the product drawing, connector layout, mounting position, electrical load and mating component before treating another part as equivalent.

How ConnectorRoute approaches the alternative

ConnectorRoute starts with the Erich Jaeger number, then checks the application: vehicle type, yearly volume, existing mating connector, drawings or photos, required approval level and supply continuity. Only after that does an alternative become a quoteable route instead of a guess.

Products that belong in the same request

For a useful quote, include related system parts where possible: 151328 2P/12V(100A) Socket (SAE J560, SAE J3082) - for liftgate and battery charging, 251290 2P/12V(100A) Plug (SAE J560, SAE J3082) - for liftgate operation and battery charging, 501187 7P/12V 100% waterproof «WeatherLock™» Socket (SAE J560 Primary, ABS), 201223 7P/12V Plug (SAE J560 Primary, ABS), 611224 7P/12V «ExperTech™» Coil (SAE J560 Primary, ABS). That helps prevent solving one article number while leaving the matching plug, socket, coil cable, adapter or supply cable as the next bottleneck.

Structured product facts

Article number
37829
Product family
Seal, Accessories, Socket
Category
Seal, Accessories, Socket
Standard
SAE J560, SAE J3082
Voltage
12V
Poles
2P
Industry
commercial vehicles
Related product families
component
For cable diameter
17,00mm - 21,00mm
American Wire Gauge (AWG)
4
Set of seal outlets
downward, 90°
No. of seal outlets
enkel
Type of seal
grommet

37829

Questions about this reference

Can Erich Jaeger 37829 be replaced one-to-one?

Sometimes, but it should not be assumed from the article number alone. The connector standard, pole count, voltage, contact type, seal, cable entry and application need to match before ConnectorRoute confirms a replacement.

What should I send with an enquiry?

Send the Erich Jaeger article number, quantities, yearly demand, photos of the installed part, drawings if available, the mating connector and any vehicle or trailer information.

Why does the page mention related products?

Truck and trailer electrics are system-based. A socket, plug, coil cable, adapter and supply cable often need to be checked together to avoid a partial replacement route.

Technical specifications

Technical data

For cable diameter
17,00mm - 21,00mm
American Wire Gauge (AWG)
4
Set of seal outlets
downward, 90°
No. of seal outlets
enkel
Type of seal
grommet