Erich Jaeger alternative

36556

single wire seal - for JAEGER Expert sockets

Use this article number as the starting point for a quote: ConnectorRoute checks suitable alternatives, fit, availability, MOQ and lead time before proposing a replacement route.

ConnectorRoute is independent and is not affiliated with Erich Jaeger GmbH. Brand and article references are used for identification and cross-reference purposes only.

Product context

Product description and application

Erich Jaeger 36556 is single wire seal - for JAEGER Expert sockets. This component belongs to a vehicle electrical system. The article number is only the starting point; the practical replacement depends on the connected system, mounting situation and electrical function. ISO 7638-1, ISO 7638-2, SAE J560 and 12V should be verified against the vehicle or trailer wiring diagram. The known selection frame is ISO 7638-1, ISO 7638-2, SAE J560, 12V, 7P and commercial vehicles, agriculture.

What does 36556 do?

This page treats 36556 as a real vehicle-electrical component, not just as a search term. In practice the part is selected by connector family, electrical standard, voltage, pole count and the way it is mounted or connected in the vehicle. For a socket, accessories, seal, the mating component and cable route are part of the decision.

Technical checks before replacing it

Check the product drawing, connector layout, mounting position, electrical load and mating component before treating another part as equivalent.

How ConnectorRoute approaches the alternative

ConnectorRoute starts with the Erich Jaeger number, then checks the application: vehicle type, yearly volume, existing mating connector, drawings or photos, required approval level and supply continuity. Only after that does an alternative become a quoteable route instead of a guess.

Products that belong in the same request

For a useful quote, include related system parts where possible: 141172 "JAEGER Basic" parking socket, 141144 "JAEGER Expert" parking socket, 241071 7P/12V Plug (ISO 7638-2 ABS, EBS, ADR), 50966 Stuff plug - for JAEGER Expert socket - is mandatory for unoccupied chambers in order to ensure water tightness), 611267 7P/12V «ExperTech™» Coil (SAE J560 Primary, ABS). That helps prevent solving one article number while leaving the matching plug, socket, coil cable, adapter or supply cable as the next bottleneck.

Structured product facts

Article number
36556
Product family
Socket, Accessories, Seal
Category
Socket, Accessories, Seal
Standard
ISO 7638-1, ISO 7638-2, SAE J560
Voltage
12V
Poles
7P
Industry
commercial vehicles, agriculture
Related product families
component
American Wire Gauge (AWG)
10 AWG
Area of application
trekkend voertuig
Type of seal
single wire seal
Contact: for max. wire cross section [in mm²]
4
Contact: for min. wire cross section [in mm²]
4

36556

Questions about this reference

Can Erich Jaeger 36556 be replaced one-to-one?

Sometimes, but it should not be assumed from the article number alone. The connector standard, pole count, voltage, contact type, seal, cable entry and application need to match before ConnectorRoute confirms a replacement.

What should I send with an enquiry?

Send the Erich Jaeger article number, quantities, yearly demand, photos of the installed part, drawings if available, the mating connector and any vehicle or trailer information.

Why does the page mention related products?

Truck and trailer electrics are system-based. A socket, plug, coil cable, adapter and supply cable often need to be checked together to avoid a partial replacement route.

Technical specifications

Technical data

American Wire Gauge (AWG)
10 AWG
Area of application
trekkend voertuig
Type of seal
single wire seal
Contact: for max. wire cross section [in mm²]
4
Contact: for min. wire cross section [in mm²]
4