C ConnectorRoute

Erich Jaeger alternative

251093

2P/24V(135A) Plug (VG 96917)

Use this article number as the starting point for a quote: ConnectorRoute checks suitable alternatives, fit, availability, MOQ and lead time before proposing a replacement route.

Request quote Official Erich Jaeger product page

ConnectorRoute is independent and is not affiliated with Erich Jaeger GmbH. Brand and article references are used for identification and cross-reference purposes only.

External article references

Known cross-reference numbers

These supplier, distributor and vehicle-brand references were present in the supplied highrunner overview. Use them for identification; ConnectorRoute still validates the technical replacement route before quoting.

Brand / supplier Reference numbers
Europart 6220251093
Hella 8JA 001 931-081
Herth & Buss 51305708

System products

Products often checked together with this reference: matching plugs, sockets, coil cables, adapters and supply cables. Generic installation material is intentionally excluded.

Product context

Product description and application

Erich Jaeger 251093 is 2P/24V(135A) Plug (VG 96917). This plug is the cable-side half of the connection. It needs to match the socket mechanically and electrically, including contact type, cable diameter, sealing and the exact connector standard. VG 96917 and 24V should be verified against the vehicle or trailer wiring diagram. The known selection frame is VG 96917, 24V, 2P and defensievoertuigen.

What does 251093 do?

This page treats 251093 as a real vehicle-electrical component, not just as a search term. In practice the part is selected by connector family, electrical standard, voltage, pole count and the way it is mounted or connected in the vehicle. For a plug.png, the mating component and cable route are part of the decision.

Technical checks before replacing it

Check the product drawing, connector layout, mounting position, electrical load and mating component before treating another part as equivalent.

How ConnectorRoute approaches the alternative

ConnectorRoute starts with the Erich Jaeger number, then checks the application: vehicle type, yearly volume, existing mating connector, drawings or photos, required approval level and supply continuity. Only after that does an alternative become a quoteable route instead of a guess.

Products that belong in the same request

For a useful quote, include related system parts where possible: 151211 2P/24V(168A) Socket (VG 96917 A002), 651910 2P/24V(135A) Cable (VG 96917), 652092 2P/24V(135A) Coil (VG 96927-12), 311181 2P/24V(300A) Adapter (STANAG 4074 / MIL-PRF-62122, VG 96917), 301108 2P/24V(168A) Coupler (VG 96917 D001) - with screw caps for connection of 2 connecting cables. That helps prevent solving one article number while leaving the matching plug, socket, coil cable, adapter or supply cable as the next bottleneck.

Structured product facts

Article number
251093
Product family
plug.png
Category
plug.png
Standard
VG 96917
Voltage
24V
Poles
2P
Industry
defensievoertuigen
Related product families
component
External cross-references
Europart: 6220251093 · Hella: 8JA 001 931-081 · Herth & Buss: 51305708
For cable diameter
12,00mm
Contact termination
solder contact, crimp contact
Protection
IP X4, IP X7, IP 54
Packaging
PE bag
No. of seal outlets
dubbel

251093

Questions about this reference

Can Erich Jaeger 251093 be replaced one-to-one?

Sometimes, but it should not be assumed from the article number alone. The connector standard, pole count, voltage, contact type, seal, cable entry and application need to match before ConnectorRoute confirms a replacement.

What should I send with an enquiry?

Send the Erich Jaeger article number, quantities, yearly demand, photos of the installed part, drawings if available, the mating connector and any vehicle or trailer information.

Why does the page mention related products?

Truck and trailer electrics are system-based. A socket, plug, coil cable, adapter and supply cable often need to be checked together to avoid a partial replacement route.

Technical specifications

Technical data

For cable diameter
12,00mm
Contact termination
solder contact, crimp contact
Protection
IP X4, IP X7, IP 54
Packaging
PE bag
No. of seal outlets
dubbel